- Plastic Rods[10]
- Other Plastic Products[10]
- Valve Balls[1]
- Polymer[9]
- Other Machinery[1]
- Plastic Tubes[7]
- Valves[2]
- Aluminum Composite Panels[1]
- Other Electrical Equipment[9]
- Gaskets[1]
- Insulation Materials & Elements[1]
- Auto Clutch[1]
- Auto Motor[1]
- Flanges[2]
- Plastic Sheets[6]
- Other Bearings[1]
- Cylindrical Roller Bearings[1]
- Seals[2]
- Electricity Generation[1]
- Heat Transfer Equipment[1]
- Chemical Process Equipment Parts[1]
- Electronic Plastic[1]
- Bushings[2]
- Pipe Fittings[1]
- General Mechanical Components Stock[1]
- Waste Management[1]
- Other Mechanical Parts[2]
- Sheet[1]
- UHMWPE Fiber[1]
- Other Industrial Filtration Equipment[3]
- HDPE[1]
- PTFE[1]
- Contact Person : Ms. Wang Serena
- Company Name : Zhuzhou Hongda Polymer Materials Co., Ltd.
- Tel : 86-731-28623999
- Fax : 86-731-28626613
- Address : Hunan,Zhuzhou,Guomuyuan.Qingshuitang
- Country/Region : China
- Zip : 412004
Extruded FEP tube
Fluorinated ethylene propylene(FEP,F46) products
FEP is a modified category of PTFE. It remains basically the properties of PTFE, like excellent high- low-temperature resistance, chemical stability, dielectricity, high non-adhesiveness and mechanical strength. Compare to PTFE, it has better elasticity and transparency and is only 50 lower than PTFE by limit of high temperature resistance.
Main technical indicators of FEP
Indicator | Unit | Indicator figure | |
Rod, sheet | Tube, membrane | ||
density | g/cm3 | 2.14-2.17 | |
Tensile strength | Mpa | 20 | 14 |
Ultimate elongation | % | 200 | 175 |
Temperature range | °C | - 196-200 | |
Dielectricity strength | Kv/mm | 15 |
FEP rod, tube unit:mm
Type | Diameter | Length | Application |
Molded rod | Φ5-Φ20 | 200 | Anti-corrosion, seal, antifriction, insulation parts. |
Φ25-Φ100 | 100-150 | ||
Extruded tube | Φ3-Φ25 | Any length | Feeding pipe for corrosion fluid, protection pipe for wire. |
Φ26-Φ200 | ≤4200 | ||
FEP rod and tube products are compatible to corresponding standard. |
Extruded FEP tube